Sabre 42 Fly Bridge Specifications

Length Overall

46′ 0″ (14.02 M)

Hull Length

41′ 0″ (12.46 M)


14′ 0″(4.27 M)


3′ 4″ (1.02 M)

Displacement (half load)

31,500 lbs (14,288 kg)


380 US Gallons (1440 L) 


140 US Gallons (530 L) 


60 US Gallons (225 L)

Air Draft (w/mast)

18′ 11″ (5.77 M)
Designed to ABYC, NMMA, USCG and CE Category B standards


Show All


Modified Deep “V” Planing hull design, with shallow pod drive tunnels for Cummins Zeus propulsion system
16º deadrise at transom, 23º deadrise amidships
ISO NPG white gelcoat w/vinylester backup resin
Bottom, topsides and transom resin-infused biaxial E-glass with Corecell SAN foam core
Stringer system biaxial E-glass with foam core
VIP resin infused swim platform with molded-in anti-skid surface and under-mount ladder.
Hull side rubbing strakes
PVC rub rail with stainless steel cap
Painted urethane double boot top
Gold color recessed cove stripe

Deck and Hardtop

ISO NPG gelcoat
Resin-infused biaxial E-glass with balsa core
Molded-in anti-skid deck surfaces
Stainless steel bi-fold entry door
Sliding windows in salon cabin sides
One fixed and one opening window in salon aft bulkhead
Hinged access door to side deck at helm
Flush, outward opening, transom door with latch
Anchor locker with slam latch
Lazarette hatches with gas struts and compression latches
Hand rails at each corner on cockpit coamings
Large engine room hatch in the main salon with compression latches
White rub rail and black bang rail on all dark colored hulls
White rub rail and white bang rail on all light colored hulls

Deck Hardware

1 1/4″ Diameter type 316 stainless steel perimeter rail system
(6) 12” Stainless steel cleats: two forward, four mid-ship
(2) Bollard cleats in aft cockpit
(1) 10” Stainless steel cleat to starboard of windlass as anchor rode tie off
(2) Custom cast stainless steel mid-rail line chocks
(2) Custom cast stainless steel skene chocks forward
Custom stainless steel bow pulpit with dual anchor roller
Anchor windlass, electric rope-chain type
Teak flag staff and socket on taffrail
Teak table in cockpit
Burgee staff for bow pulpit
(3) Lewmar Low Profile polished aluminum hatches w/screens
(6) Custom stainless steel opening port lights
Teak toe rails
Teak cabin-side eyebrow
Custom cast stainless steel “SABRE” logo
Raw water washdown system at bow
Kahlenberg single chrome air horn

Lower Helm Station

Cummins DTS single lever electronic controls
One Cummins Smart Craft display (engine data, tank levels, vessel data, alarms)
Triple windshield wipers with washers
Ritchie Compass
Switch controls for horn, running lights, anchor light, engine room blower and optional equipment
Stazo 400mm custom teak steering wheel with tilt helm and Sabre logo
(1) Stidd N-series helm seat with Ultraleather fabric
NMEA 2000 backbone

Fly Bridge Helm Station

Cummins DTS single lever electronic controls.
Single Cummins Smart Craft display (engine data, tank levels, vessel data, alarms).
(2) Stidd N-series helm seats. (One in main salon)
Teal table on fixed base
L-settee dry storage below.
16” Stainless steel steering wheel with tilt helm.
Controls (see propulsion)
Stainless steel fly bridge ladder with teak treads.


Twin Cummins QSB 425hp 6.7 liter electronic fresh water-cooled diesel engines
Twin CMD Zeus 3500 pod drives with integrated steering and trim tabs
Volvo IPS 500 and 600 options available
120A 12V alternators each engine
(2) Exhaust by-pass mufflers
Engine room blower
Engine room vent ducts
Engine room floor with FRP anti-skid
White gelcoated engine room
Mylar face foam noise barrier

Fuel System

(2) 190 gal diesel fuel tanks port and starboard
Racor fuel filters with water in fuel probes
(2) x 2” “Diesel” deck fill plates

Steering and Trim Systems

CMD helm with joystick
Trim tabs integrated with CMD Zeus pod drives
Autopilot integrated with CMD Zeus system
GPS receiver
Skyhook GPS positioning system

12VDC Electrical System

Two AGM Group 31 dedicated engine start batteries
Four “Full River” DC250 6 volt AGM deep cycle ship’s service batteries
One AGM Group 24 generator start battery
Remote control battery switches with controls at helm
Manual emergency battery crossover switch
Illuminated main circuit breaker distribution on bulkhead opposite galley
Digital battery monitor
 – LED cabin reading lights
 – High output LED lights in the overhead
 – LED strip lighting in appropriate locations
 – LED engine room lighting
 – LED cockpit courtesy lights
 – Tri-color lights over helm
Dimmers in cockpit, main salon, galley and staterooms
Marine-grade tinned wire throughout
12VDC USB ports at helm and in all cabins

120VAC Electrical System

Onan 9.0 kw generator including:
 – Onan E Series display
 – Dedicated start battery
 – Water lift muffler and water drop muffler
 – Cooling water intake strainer
 – Sound shield
 – Transfer switch
75′ 50A shore power cord on Glendining cord reel
Isolation transformer
Illuminated main circuit breaker distribution panel
Digital AC system monitor
(1) 120V outlet in each cabin and (1) in engine room
All galley and head receptacles are GFI protected
Additional outlets positioned in locations appropriate for entertainment systems in main and forward cabin
50amp, 3-bank battery charger
Reverse cycle heat/ air conditioning in (3) zones: 16k BTU in main salon, 10k BTU in master stateroom, 12k BTU in guest cabin and galley

Entertainment Media

Fusion Black Box System with Bluetooth. Remote controls at helm and cockpit, four speakers: two in the main salon, two in the cockpit.
10″ Kicker subwoofer
10″ Kicker Amplifier
32” LED TV on electric lift inside cabinet in Main Salon
24” LED TVs in the staterooms
HDMI cables run from each TV to the storage area starboard of the lower lounge

Forward Stateroom

Spacious Island Berth layout with 6″ mattress ¾” laminated trim
Cherry hull ceilings
(2) Drawers under berth with A/C return grills under drawers
(2) Drawers in bureau w/locker w/shelf above and single louvered door
Upper enclosed shelves with storage behind. Cabinet face has (2) louvered doors
Recessed shelf with fiddle on starboard main bulkhead
Large cedar lined hanging locker to port, with louvered door, shelf and hangar pole
Open shelf above port hanging locker
Teak and holly sole
Sound deadening soft headliner panels
Pocket door accessing the forward stateroom

Second Stateroom

Double berth, 6″ foam mattress, ¾” laminated trim
Cherry hull ceilings
(4) Drawers under berth, A/C return grille beside
Forward bulkhead storage locker and shelf
Night stand with drawers below
Teak and holly sole
Sound deadening soft headliner panels
Pocket doors between lower foyer and second stateroom
Optional dinette is available


Stainless steel under mount oval sink
Circular shower stall with seat and locker outboard
Hot and cold pressure water
Electric shower sump pump
Storage lockers
Solid surface vanity top with bull nose
Towel bar
Wood trimmed mirror over sink
Ventilation blower



Mid-level galley
Solid surface galley counter top
Stainless steel under mount sink with Scandvik faucet
Birds Eye Maple galley sole
Vitrifrigo 2-drawer Refrigeration with stainless steel doors
Isotherm 1-drawer Freezer with stainless steel door
Two burner touch control electric cook top
Convection microwave with stainless steel door above aft counter
Cabinet with (2) louvered doors on the forward bulkhead
Drawers and storage lockers below counter
Built-in waste basket
Large drawer under microwave opens athwartships

Main Salon

“L” settee to port with storage and Sabre tool drawer beneath. 5” foam cushions covered with Sunbrella fabric.
Oval high gloss table with hi-low pedestal, lowers to coffee table height
Settee to starboard with drawer storage below
Sound deadening soft headliner panels
Stidd N series helm chair


Varnished cherry interior finish
Screens on all opening ports
Ocean Air screen/blinds on deck hatches
Ocean Air blinds on side windows and side door (not the windshield).
Accord shades on all opening ports
Sabre offered fabric Corian decor package
Dovetailed maple drawer boxes

Fresh Water System

Water capacity 140 gals
Stainless steel 11-gallon water heater, operates on 110-VAC
Temperature control valve on hot water supply
Hot and cold water pressure system 12v
Fresh water spigot in engine room
Transom shower, hot and cold
Shore water inlet with filter


Waste Disposal

Polyethylene holding tank with 60-gallon capacity
Jabsco Quiet Flush fresh water MSD
Diaphragm waste pump on holding tank


Fire extinguishers, (4) at 2 1/2 lbs
Marelon sea valves on all thru-hull fittings below waterline
Bonding system to safeguard against galvanic corrosion
Automatic fire extinguishing discharge system in engine space with override
(3) Automatic 12V electric bilge pumps
(3) High water switches and alarm